SHIELDskin latex gloves and SHIELDskin nitrile/polychloroprene gloves are Category III PPE registered. They offer a high level of protection against biohazards (AQL 0.65 - EN 374-2:2014 Level 3) and are virus resistant (ISO 16604:2004 procedure B). SHIELDskin is the perfect glove solution for your biosafety laboratory.
67 625X series.
Orange: Biological risk.
Protective glove, laboratory glove.
Category III PPE glove (PPE Directive 89/686/EEC).
Complex Design - For mortal and irreversible risks.
Powder-free orange/white nitrile/polychloroprene glove.
twinSHIELD™ double-walled protection.
Ambidextrous.
300 mm / 0.14 mm (EN 420:2003 + A1:2009).
AQL 0.65 (EN 374-2:2014 Level 3).
Viral penetration test (ISO 16604:2004 Procedure B & ASTM F1671-97b).
Waterproof and for low chemical protection.
Tested for chemical permeation (EN 16523-1:2015 supersedes EN 374-3:2003).
Tested according to EN 1149-1-2-3.
Type I hypersensivity eliminated - Type IV hypersensivity reduced.
Accelerator free.
A REVOLUTION IN GLOVE TECHNOLOGY
The widely acclaimed SHIELDskin gloves provide you with the highest level of "compliance, comfort and protection". SHIELDskin nitrile/neoprene gloves have been specifically designed for laboratory use to protect your assays against contamination and to protect you against biological and chemical hazards.
PRODUCT CATEGORY
SHIELDskin gloves are classified as Category III PPE against the mortal or irreversible risks as defined in the PPE Regulation (EU) 2016/425. Only Category III PPE gloves are likely to provide the necessary personal protection needed in a laboratory.
GLOVE USAGE
SHIELDskin nitrile/neoprene and latex gloves have been specifically designed for laboratory use to protect your assays against contamination and to protect you against biological and chemical hazards.
CHEMICAL PROTECTION
A minimum length of 260 mm/10.2". By offering 10% extra length compared to standard length laboratory gloves (240 mm) and with extra thickness, SHIELDskin gloves provide optimal protection against biohazards and chemical splashes. SHIELDskin gloves resist to permeation for at least 30 minutes against 3 out of the 18 chemicals listed in ISO 374-1:2016+A1:2018 (tested according to EN 16523-1:2015+A1:2018).
BIOHAZARD PROTECTION
SHIELDskin gloves are tested to demonstrate compliance with ISO 374-5:2016 for protection against biohazard. SHIELDskin gloves have an Acceptable Quality Level (AQL) of 0.25, representing a performance Level of 3 according to EN 374-2:2014. This level of protection in standard laboratory gloves has never previously been available and will provide additional confidence in meeting biosecurity procedures. Microorganism resistant per EN 374-2:2014 Level 3 (AQL 0.25) and virus resistant per ISO 16604:2004 Procedure B.
ALLERGY
SHIELDskin ORANGE NITRILE gloves are accelerator-free thereby limiting the risk of type IV allergic contact dermatitis (or type IV delayed hypersensitivity). Furthermore, there are non-detectable levels of chemical allergens using aqueous solution extraction (Phosphate buffered solution) and High Performance Liquid Chromatography (HPLC) assay method for quantitative analysis.
The SHIELDskin ORANGE NITRILE gloves are 100% latex-free providing a solution for those seeking to eliminate or minimize the risk of Natural Rubber Latex type I allergy (or type I hypersensitivity).